ECOO-BL-H Blanket
Application: Appropriate to high quality sheet fed print and metal printing
Construction: 4/3 ply
Thickness: 1.97/1.70±0.02mm
Color: Blue
Compressible layer: Microspheres
Surface: Micro-ground and polished
Roughness: 0.70-1.0μm
Hardness: 78-82 Shore A
Elongation: ≤ 0.9%
Tensile strength: ≥ 90
Characteristic:
Special rubber surface had good solvent resistance. High smash and edge marking resistance, minimal dot gain, prefer to precise print.
Diagram:
Attention:
Before installation, please measure the thickness of blanket for adjusting the press accurately;
While installation, please use the constant wrench to tighten gradually;
After installation, please clean the rubber surface and ready for print;
During the use, please often use the special solvent to clean the rubber surface for extending the useful time.